Home Maintenance HVAC, Plumbing Tactics Reduce Emergencies

Your water heater is one rather used and much more costly appliances in your home, and consumes a large portion of your energy dollars each month. And experts say regular care and maintenance is essential to protecting your investment and saving with regards to your home heating as well as costs.

Regular flushing of your water heater is among the single most important step you consider to prolong its service life and to save energy. For time, sediments build up in the bottom of your hot water heater. These sediments act as a barrier between the flame and the tank, thereby making your heater burn longer and hotter. Partly destructive to the tank, but highly inefficient and will significantly raise your heating costs.

In most regarding the country, the standard water heater lasts 3-5 years. Regularly flushing your water heater can double the life of your water heater from 3-5 to 7-10 years. Device costs of replacement running from $700 to over $1200 in some cases, getting the most from your heater is critical in today’s affordable. In addition, regular flushing makes your hot water heater run more efficiently and can cut heating costs in half. Depending on the volume of drinking water your home uses, that can mean a savings of $20 to over $50 a fair amount of time.

To drain your water heater, you can find should set the thermostat to pilot (if it is really a gas water heater) or turn the circuit breaker off (if it is electric heater). Failure to do so could result in overheating and severe damage to the actual heater. Next, close the water supply valve located on the water inlet line going into your water heater. Then you’re connect a hose to the drain valve located towards the end of the space heater. Open the drain and allow it working out until all for the water has emptied from the air conditioner. Then close the drain. Open the water supply valve and refill the heater tank. You should also open a hot water faucet somewhere indoors and stand there and watch it run for several minutes until water flows out perfectly. This will allow air to vent via the heater and the water lines. Finally, you can turn the thermostat in order to its regular setting (for a gas heater), or turn the circuit breakers back on (for an electric heater).

Besides regularly flushing your water heater, plumbing experts also advise adding a water treatment system to your home to filter or condition the water so may be less corrosive to your plumbing system, particularly in areas possess hard water. For more ways to care for and protect your home plumbing system, contact a licensed, professional plumbing contractor in your area to discuss options and products to work for you.

Abacus Plumbing, Air Conditioning & Electrical

The Woodlands, TX

(281) 528-1610

https://goo.gl/maps/Fccz1JjKrjN2